德國JDT螺栓緊固式吊點 TAPG型
Attachment-point，bolt-on type
承載能力為3-8噸的德國JDT螺栓緊固式吊點
優點：
—緊湊堅固式設計
—4倍安全系數
—120度擺動角
—螺栓連接板可作劃線樣板使用
—產品含經過裂紋測試的螺栓。
D形吊環必須能過自由擺
Attachment-point，bolt-on type, in working load limits of 3-8 t.
The advantages:
—Compact design
—Secured four times against breakage
—Working range 1200
—Bolt on plate also serves as marking stencil
—including bolts, 100% crack-tested
The D-link must be able to move freely. The load take-up may not be supported on edges or on the sling point
螺栓符合DIN EN ISO 4017 (DIN 933)的標準——強度等級10.9，100%經裂紋測試
在非均勻對稱起吊情況下，視雙肢或3/4肢鏈條的極限工作載荷等同于單肢鏈條最小極限工作載荷。
